Cognitive Solutions Advantage RFID Thermal Printer - Manual (Page 62)

P R O G R A M M I N G
!RFID MARK
Function This command sets whether or not to print a
defined mark on a label that fails to write expected
data to an RFID tag.
Explicit Form
!RFID MARK ON/OFF
Parameters
ON
When the setting is ON, the printer will
mark a label that fails a RT, WT, or
WTLOCK
command.
Response No specific response
Command Type RFID Setup/Debug Command
Example To Printer:
!RFID MARK OFF
NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.
Copyright © 2004, Cognitive. 57