Cognitive Solutions Advantage RFID Thermal Printer - Manual (Page 58)

P R O G R A M M I N G
!RFID CONFIRM
Function Controls the transmission of a ‘Success’ or ‘Failure’
indication at the very end of any CPL-RFID
command’s execution.
Explicit Form
!RFID CONFIRM on/off
Parameters
ON
When the setting is ON, the printer will
return RFID:SUCCESS or RFID
:FAILURE
for every command issued to
the printer.
OFF When set to OFF, no messages are sent
to the host.
Response In the case of transitioning to the CONFIRM ON
state, the Printer will response by transmitting a
command Success to the Host Machine.
Conversely, in the case of transitioning to the
CONFIRM OFF
state, the Printer will have no
specific response resulting from the execution of
this command.
Command Type RFID Setup/Debug Command
Example To Printer:
!RFID CONFIRM ON
From Printer:
[RFID:SUCCESS]
NOTE: All CPL-RFID Configuration-Setup Commands
are processed outside the context of a standard CPL
Label-Format (i.e. CPL beginning with a header-line ‘! 0
100 nnn 1’ and ending with ‘END’). Attempts to use
CPL-RFID Configuration-Setup Commands within a
Label-Format result are ignored without indication.
Copyright © 2004, Cognitive. 53