Dvd video player operations, English, English owner’ s manual change dvd system settings – Clarion NX501 User Manual

Page 19: Watching to a disc

Advertising
background image

NX501/NZ501

19

English

English

Owner’

s Manual

Change DVD System Settings

Note: If the set up operation is performed in the
middle of DVD video play, the disc will restart from the
beginning.

Selecting DVD Set Up Menu

1. Press the

[Setting] button on the Main Menu to

access the Video set up menu.

2. Press

[Video] button. The video menu is displayed.

Setting up the Screen Size

Press the

[DVD Wide Screen Mode] button to turn on

or turn off the DVD wide screen mode.

The factory default setting is “On”

Note: Not all DVD disc supports this function.

DVD Wide Screen Mode On

DVD Wide Screen Mode Off

Setting up the password for parental level
control

The factory default pass code is “0000”.

1. In Main Menu press

[Setting] button. Press [Others]

button on the display. Touch the

[Set Password] ----

and a numerical key pad will appear.

Input the old password,and touch the

[OK] key,or

input "4356" to reset password.

Input a new password,and touch the

[OK] key.

Input the same new password again,and touch the
[OK] key.

Note: When a disc with view restrictions is inserted, you
will be prompted to input this password. The disc will not
be viewable until the correct password is entered.

Set rating for parental level control

1. Select Others screen while in Setting mode. Press
[Parental Control] button. Press the desired rating for
level control. Use this table to set the parental level.

Kid Safe

Kid Safe

G

General Audiences

PG

Parental Guidance Suggested

PG-13

Parents Strongly Cautioned

PG-R

Parental Guidance Restricted

R

Restricted

NC-17

No One 17 And Under Admitted

Adult

Only Adult

• The contents that the parental level restricts vary
with the country code.

Note: The rating can be selected only under the
password unlocked status, and the limits can be set only
under the password locked status.

Watching to a disc

1. To load a disc:

Insert the disc into the center of the insertion slot the
label side facing up.

Note:
Never insert foreign objects into the disc insertion slot.

• If the disc is not inserted easily, there may be another
disc in the mechanism or the unit may require service.

• 8cm (single play) discs cannot be used.

8. DVD VIDEO PLAYER OPERATIONS

NX_NZ501北美版说明书.indd 19

2011-1-19 17:36:19

Advertising
This manual is related to the following products: