Clarion NX501 - Manual (Page 76)

NX501/NZ501 English 8
7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings
menu (page 75).
8. Clarion Mobile Map offers you to watch the tutorial that leads you through the basic steps of
navigation. Tap if you would like to get an instant understanding of the
functions of your software. You can run it later if you choose .
After the initial setup, the Map screen appears and you can start using Clarion Mobile Map.
2.1 Buttons and other controls on the screen
When you are using Clarion Mobile Map, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to perform a
major reconfiguration, or you are about to lose some of your data or settings. Otherwise, Clarion Mobile
Map saves your selections and applies the new settings without confirmation as soon as you use the
controls.
Type Example Description How
to use it
Button Tap it to initiate a function, to
open a new screen, or to set a
parameter.
Tap it once.
Button
with value
Some buttons display the current
value of a field or setting. Tap the
button to change the value. After
the change, the new value is
shown on the button.
Tap it once.
Icon Shows status information. Some icons also function as a
button. Tap them once.
List When you need to select from
several options, they appear in a
list.
Grab the list anywhere and slide
your finger up or down.
Depending on the speed of the
sliding, the list will scroll fast or
slow, only a bit or till the end.
Alternatively, move between
pages with the and
buttons and tap the value that
you want.