Chicago Electric ROUTER TABLE WITH ROUTER 95380 - Manual (Page 11)

SKU 95380 For technical questions, please call 1-800-444-3353 PAGE 11
To Connect A Vacuum Hose To The Dust Port:
Figure C
DUST PORT
(1-3/8” OUTSIDE DIAMETER)
The Dust Port of the Router Table is 1-3/8” O.D. (outside diameter) and is located
at the rear of the Router Table. Use an automotive hose clamp (not included) to
secure an appropriate size vacuum hose (not included) to the Dust Port.
(See Figure C.)
The Router Table Power Switch/Outlets Assembly:
1.
SAFETY KEY
POWER SWITCH
Figure D
The Power Switch/Outlets (2B) assembly is equipped with a Safety Key
to help prevent unauthorized use of the Router Table. (See Figure D.)
2. To provide power to the Router Table, connect the Power Cord/Plug of the
Power Switch/Outlets assembly to the nearest 110 volt, grounded, electrical
outlet. Insert the Safety Key into the Power Switch (2B), and pull up on the
Power Switch to provide power to the Router Table (and Router). To shut off
power to the Router Table (and Router), push down on the Power Switch and
remove the Safety Key. Make sure to store the Safety Key in a safe location,
out of reach of children and other unauthorized people. (See Figure D.)
3. The Power Switch/Outlets (2B) assembly also provides two 110
volt, grounded, electrical outlets with which to provide electrical
power to the Router and/or another electrically powered tool.