CREATIVE DC-CAM 3200Z - Manual (Page 13)

Preparing to Take Pictures
– - 10 - –
Setting the Power Save Function
To save battery power, your camera can be set to turn itself off after 1, 3 (default), or 5
minutes of inactivity. The period can be set in the SETUP menu.
1. Turn the camera on.
2. Press the MENU button.
3. Press the RIGHT button to select the SETUP
menu.
4. Press the UP or DOWN buttons to select the
Power Save option.
5. Press the RIGHT button to enter the Power
Save submenu
6. Press the UP or DOWN buttons to select 1, 2
or 3 mins. The camera will turn itself off
automatically if not used for the specified
period. You can also turn the function off
completely.
7. Press SET button to save your option
8. Press the MENU button to leave the Power
Save submenu.
Note:
The Power Save function will work only when the camera is powered by
batteries. If a DC power supply is used, the camera will not turn off
automatically.