CREATIVE DC-CAM 3200Z - Manual (Page 20)

Taking Pictures
– - 17 - –
Using Different Metering Options
There are 3 different light metering options available on your camera. Auto Metering
automatically selects the best exposure for you, Multi Metering selects an exposure
based on readings from multiple points in the subject area and Spot Metering selects an
exposure based on a single reading taken from the center of your picture.
1. Turn the camera on, select Photo mode and
press the MENU button.
2. Use the UP or DOWN buttons to select the
Metering option.
3. Press the RIGHT button to enter the Metering
submenu.
4. Use the UP or DOWN buttons to select a
metering option from the list.
5. Press the SET button to confirm your choice or
press the MENU button to leave the menu.
Setting the White Balance
Adjust the white balance to match different light sources such as sunlight, incandescent
(tungsten) lighting or, fluorescent lighting.
1. Turn the camera on and press MENU.
2. Use the UP or DOWN keys to select the
White Balance option.
3. Press the RIGHT key to enter the White
Balance submenu.
4. Use the LEFT or RIGHT keys to select an
option from the list.
5. Press the SET button to save your selection
or MENU button to cancel.