CREATIVE DC-CAM 3200Z - Manual (Page 35)

– - 32 - –
7
Software Installation
To install the software:
NOTES:
• If the installation program does not start automatically, click
Start
> Run, In the Open box, type d:\startup\setup.exe
(replace d:\ with the drive letter of your CD-ROM/DVD-ROM
drive) and then click the OK button.
Software Driver
The camera can be used as a mass storage device and can be connected to a TV to
view pictures. If you are using Windows 98 SE, you must install the software driver so
that your computer can recognize the camera as a mass storage device.
Roxio PhotoSuite 5
Roxio PhotoSuite 5 lets you edit, crop and print the photos you download to your
computer from the digital camera. Refer to the application help documentation for
information on using the software. To launch this application:
Click Start
> Programs or All Programs > Roxio PhotoSuite 5 .
Roxio VideoWave Movie Creator
Roxio VideoWave Movie Creator lets you to edit the videos that you download to your
computer from the digital camera. Refer to the application help documentation for
information on using the software. To launch this application:
C
lick Start > Programs or All Programs > Roxio VideoWave Movie Creator
1. Insert the Installation CD into your CD-ROM/DVD-ROM drive.
The disc supports Windows Autoplay mode and starts running automatically.
2. Select the driver and the applications you want to install on your computer, and
You may choose to restart your computer only after installing the driver and
3. Follow the instructions on the screen .
then click the OK button.
the selected applications.