Canon IMAGE RUNNER 5065 - Manual (Page 123)

NetWare Print Service Settings 4-5
4
U
s
ing a NetW
a
re
N
e
tw
o
rk
(Wi
ndo
w
s
)
❑
If you are using the remote printer mode, select [Parallel] from [Type]
➞ click
[Communication] to open the [Parallel Communication] dialog box.
Select [LPT1] from [Port], and [Manual load] under [Connection type]. Under
[Interrupts], specify the appropriate setting for your environment
➞ click [OK]
to close the [Parallel Communication] window.
❑
Under [Print Queue], enter the queue name in [Name].
❑
In [Volume], enter the volume in which the queue is placed.
To use an existing print server, click the button to the right of [Volume]
➞ select
a print server from the list box.
❑
Click [Create]
➞ exit NetWare Administrator.
3
If you are using the remote printer mode, start the print server.
❑
If you are using the NetWare file server as a print server, enter <Load
PSERVER.NLM> in the file server
➞ press [ENTER] on the keyboard.
Using PCONSOLE in the Queue Server Mode or Remote Printer Mode
in the Bindery Mode (NetWare 3.2)
1
Log in to NetWare as Supervisor
➞ start PCONSOLE.
2
If you have not set up a print server yet, set up the print
server.
❑
On the [Available Options] menu, select [Print Server Information]
➞ press
[ENTER] on the keyboard.
❑
Press [INSERT] on the keyboard.
❑
Enter the name of the print server you are setting up ➞ press [ENTER] on the
keyboard.
Be sure to remember the name of the print server. You need it to specify the
printer's protocol settings.
❑
Press [ESC] on the keyboard to return to the [Available Options] menu.
3
Set up a Queue, and then assign the print server to the queue.
❑
On the [Available Options] menu, select [Print Queue Information]
➞ press
[ENTER] on the keyboard.
❑
Press [INSERT] on the keyboard.