Canon IMAGE RUNNER 5065 - Manual (Page 70)

Protocol Settings 3-24
3
Usin
g a
TCP/IP Netw
or
k
7
On the TCP/IP Settings screen, press [DNS Settings]
➞ [DNS
Server Address Settings].
8
In <IPv6>, specify the following.
If you want to use dynamic DNS updating, enter the IPv6 address of the DNS
server in [Primary DNS Server].
If you do not want to specify a secondary DNS server, leave [Secondary DNS
Server] blank.
IMPORTANT
• You cannot enter a multicast address or address composed entirely of zeros in
[Primary DNS Server] or [Secondary DNS Server].
• If you set <Use DHCPv6> to 'On' in step 5, the IPv6 address of a DNS server you
set manually will be overwritten.