Canon IMAGE RUNNER 5065 - Manual (Page 92)

Setting Up a Computer for Printing/Sending a Fax 3-46
3
Usin
g a
TCP/IP Netw
or
k
NOTE
• The print application will be LPD and the print queue will be set to <LP> if the driver
has been installed according to the above procedures.
• This machine enables you to specify print queues other than <LP>. For details on
print queues and instructions on how to change the settings, see "Changing the
Port after Installing the Driver," on p. 3-46.
■ Changing the Port after Installing the Driver
1
Install Canon LPR2, and change the port settings.
For instructions on how to install Canon LPR2 and set ports, see the Canon LPR2
User's Guide (PDF manual). For instructions on how to display the Canon LPR2
User's Guide , see the Network Quick Start Guide .
IMPORTANT
If you use LPD, enter one of the following in [LPR Queue Name] in the [Add Port]
dialog box of Canon LPR2:
- LP
The machine prints according to its spool settings. Normally enter <LP> as a print
queue.
- SPOOL
The machine prints only after spooling a print job on the hard disk, regardless of
its spool settings.
- DIRECT
The machine prints without spooling a print job on the hard disk, regardless of its
spool settings.
Windows 2000/XP/Server 2003/Vista
In the following procedures, items displayed on the screens for Windows 2000 are
used. The items displayed may differ according to your operating system.
NOTE
If you are using Windows Vista, a dialog box may be displayed while you are performing
the procedure. In this case, enter a user name and password. For more information, see
the manuals provided with the operating system.