Crestron electronic TPS-GA-TPI - Manual (Page 31)

Crestron TPS-GA-TPI Isys ® G-Series Touchpanel Interface
The video menu for RGB controls consists of preset controls, color and size &
position submenus. Touching the RGB Color button enables controls for brightness,
contrast, red, green and blue. Touching the RGB Size & Position button enables
position, size and phase controls.
VIDEO 1 SETUP RGB (Size and position shown)
Refer to the following table for additional VIDEO 1 SETUP details.
Video 1 Setup Details – Video, S-Video, Component and RGB
VIDEO 1 SETUP
SCREEN
CONTROLS
DESCRIPTION
Current Video
Preset Displays the current Video Preset number. Saved presets
can also be called up using this control. The – and +
buttons decrement and increment the displayed value.
Load Preset Will load the selected Video Preset.
Store Preset Will store any changes you have made to the video setup at
the displayed preset number.
Restore Default
Color Settings
Restores the video settings to their original defaults.
Color Control When Video, S-Video or Component is selected as the
video type, these controls are available. The Restore
Default Color Settings
button places the controls at their
midpoint.
Brightness 1, 2 Adjusts video image brightness with the – and + buttons.
Contrast 1, 2 Adjusts video image contrast with the – and + buttons.
Saturation 3 Adjusts video image saturation with the – and + buttons.
Hue 3 Adjusts video image hue with the – and + buttons.
Red 1, 2 Adjusts the amount of red in the video signal. Available
when the RGB Color button is selected.
(Continued on following page)
Operations Guide – DOC. 6609A Isys ® G-Series Touchpanel Interface: TPS-GA-TPI • 27