Crestron electronic TPS-GA-TPI - Manual (Page 38)

Isys ® G-Series Touchpanel Interface Crestron TPS-GA-TPI
8. Calibrate the touchscreen by selecting Functions | Setup Mode | Enter
Calibration Mode in the Toolbox System Info window.
USB Connection
1. Connect the RGBHV OUT to the RGB in on the touchscreen.
2. Connect to the TPS-GA-TPI via serial or TCP/IP communication as described in
“Establishing Communication” on page 42.
3. Using the Toolbox Text Console, enter the EXTT command to set the
TPS-GA-TPI for the touchscreen you have connected.
4. Using the Toolbox Text Console, enter the TPIMODE command to set the
TPS-GA-TPI to the native resolution of the touchscreen. Refer to the
touchscreen documentation to determine its native resolution.
5. Attach a USB cable assembly between the touchscreen and the TPS-GA-TPI.
6. Reboot the TPS-GA-TPI and the touchscreen.
7. Calibrate the touchscreen by selecting Functions | Setup Mode | Enter
Calibration Mode in the Toolbox System Info window.
34 • Isys ® G-Series Touchpanel Interface: TPS-GA-TPI Operations Guide – DOC. 6609A