Cambridge SoundWorks AVS550 - Manual (Page 21)

21
Select TV Scan Mode:
Skip this step if your TV does not support Progressive
Scan video. The output mode of the AVS550 must
match the input mode of your TV set.
A. Press SETUP to enter the setup menu.
B. Select VIDEO and press ENTER.
C. Select SCAN and choose ENTER.
D. Choose PROGRESSIVE only if you have a
Progressive scan compatible TV. Otherwise choose
INTERLACED.
E. Press ENTER to confirm your selection, then press
< to return to the previous menu level.
F. Change your TV input to a progressive scan input.
IMPORTANT NOTE: If you inadvertently select
Progressive Scan with an incompatible TV, the pic-
ture may be lost and you will be unable to navigate
the menus. If this occurs:
1. Press Eject to open the drawer in DVD mode.
2. Press the SLIDE key to switch between progres-
sive and Interlaced until the picture reappears.
3. Close the drawer.
Select TV Output type:
You may skip this step if you have connected the
AVS550 to your TV using an S-Video cable. It is only
necessary if your TV has a CVBS video input exclusively.
A. Select TV OUT.
B. Choose YCrCb + CVBS.
C. Press ENTER to confirm your selection, then press
< to return to the previous menu level.