Cambridge SoundWorks AVS550 - Manual (Page 30)

30
VIDEO OUTPUT:
This selection switches the CVBS to S-video circuitry
appropriately for the TV connection used.
1. If you do not have an S-video connection between
the AVS550 and your TV set, choose YCrCb +
CVBS. Otherwise keep the default YcrCb +
S-Video setting.
2. Press ENTER to confirm your selection, then press
< to return to the previous menu level.
AV INPUT 1 and AV INPUT 2:
This selection switches the CVBS to S-Video circuitry
appropriately for the Input connection used.
1. If your AV1 Source has a CVBS connection only (no
S-video), select CVBS ONLY. Otherwise keep the
default setting of S-Video/Both.
2. Press ENTER to confirm your selection, then press
< to return to the previous menu level. Repeat for
AV2 if necessary.
AUDIO page:
Choose how the AVS500 handles Pro Logic II decod-
ing and control Dynamic Range compression.
PRO LOGIC: Sets your preference for Pro Logic
decoding of DVD’s or external digital (SPDIF) sources.
• AUTO (default) - Material containing a Dolby Digital
2.0 or 2.1 soundtrack will play back in Stereo
unless flagged in the bitstream for Dolby Pro Logic.
• ON - Stereo source material will play back in Pro
Logic mode regardless of how it is flagged.
• OFF - All non-5.1 source material will play back in
Stereo.
Note: Dolby Digital 5.1 or DTS soundtracks will take
precedence over the settings in this menu and play
back in their proper format. Also, when making a
stereo recording of a disc source from one of the
AVS550’s A/ V outputs, set Pro Logic OFF.