CLIFFORD 20.7 - Manual (Page 12)

12 © 2008 Directed Electronics. All rights reserved.
¢ Multi-car control capability
You can use the Responder LC 2-way remote control system for two cars, with
full command capability for both vehicles.
To change the car to be operated:
0RESSHOLD 1. button for 3 seconds or until the remote beeps. The
car or
selected.
Change Car: While in car selection mode, press and release the 2.
button. to scroll between car and . The car icon flashes to to
indicate the car that can be operated.
Select the car number you want to operate, and then press any command 3.
button to operate the system. The selected car remains selected until the
setting is changed.
One-way remote
Press and hold the 1. button until the amber light blinks once or twice
indicating the current vehicle (one blink = car 1, two blinks = car 2).
To scroll from one to the other press the 2. button again.
When using the remote to control the system, the amber light will flash in a
sequence of 1 or 2 flashes indicating the current vehicle mode.