CLIFFORD 20.7 - Manual (Page 39)

39 © 2008 Directed Electronics. All rights reserved.
¢ 2-way remote
Your Responder LC 2way remote control has a feature called remote power save
mode. When programmed On under remote options, the remote conserves
power by disabling the paging function if unused for more than 72 hours.
Pressing any button on the remote restores the paging function.
The default setting is On. See Remote control programming section of this guide
or ask your dealer for details on how to program.
Programming options
Your system has many custom programmable options. Some may require instal-
lation labor. Ask your authorized dealer for details.
The following is a list of the programmable options, with the factory settings in
Bold.
Active s locking (remote only) passive locking will lock the doors 30 sec-
onds after the ignition is turned Off and the last door has been closed; or
Auto Re-lock automatically locks 60 seconds after unlocking (if no door is
opened).
,OCKING5NLOCKING s On or Off.
Ignition controlled door lock feature On or s Off: When this feature is pro-
grammed on, the doors will lock three seconds after the ignition is turned
on, and unlock when the ignition is turned Off.
If your installer is programming the system, ignition lock and unlock are
independent features that can be programmed separately.
Panic mode enabled s DISABLED
pletely turned Off. (Some states have laws against horns continually honk-
ing in moving cars.)
Comfort closure s is a programming option which closes the vehicle’s win-