Remote engine control, Idle down mode - exiting the vehicle – Crimestopper Security Products RS901 RS900ER User Manual

Page 4

Advertising
background image

REMOTE ENGINE CONTROL

IDLE DOWN MODE
This mode allows the unit to take over operation of the parked vehicle while the ignition key is removed
and you exit the vehicle. The vehicle is put into a remote running condition before you exit and it will
remain running for the programmed run time or until you come back.

Example:
You pull up to a convenience store for a quick stop, "Idle Down" mode keeps engine running
when you exit the vehicle, remote lock doors or arm alarm. When you return, unlock or disarm
alarm, turn ignition ON and drive away.

IDLE DOWN MODE - EXITING THE VEHICLE:

1) With engine running, press Remote Start button for at least one second.
2) Parking Lights will turn ON.
3) Turn Ignition switch OFF. Engine will remain running.
4) Exit vehicle (Remote lock doors if desired).
5) Engine will remain running for programmed run time.

ENTERING A VEHICLE DURING “IDLE-DOWN” or “INFINITY RUN” MODES:

1) With engine running in "IDLE DOWN" (parking lights ON), unlock door. (Remote unlock or disarm

alarm if applicable)

2) Enter vehicle and be careful not to step on brake pedal! (Remote Start Reset)
3) Turn Ignition to ON/RUN position, then depress brake pedal to reset the Remote Starter. Parking

lights will turn off, then drive away.



IGN

SOLID

OFF

START

SOLID

IGN

OFF

START

Advertising