Casio IT-3000 - Manual (Page 74)

E-72
1
2
SD memory card can be installed in the SD Memory Card slot on the Handheld Printer
Terminal. Insert (or remove) an SD memory card according to the procedure described
below.
Inserting an SD Memory Card
1. Check that the power is off. If the power is on, always make sure to turn it off by
pressing the power key.
2. Open the cover of the SD memory
card slot ( ) and insert an SD
memory card all the way in until the
top of the SD memory card aligns
with the entrance of the slot of the
Handheld Printer Terminal ( ).
3. Close the cover of the SD memory card slot.
Removing an SD Memory Card
1. Check that the power is off. If the power is on, always make sure to turn it off by
pressing the power key.
2. Open the cover of the SD memory
card slot and press on the SD memory
card ( ). The SD memory card is
pushed out ( ).
3. Pull out the SD memory card and close the cover of the SD memory card slot.
1
2
Using SD Memory Cards
2 1
1
2
IT-3000_E_P54_77.p65 07.10.3, 5:40 PM 72