Casio IT-3000 - Manual (Page 78)

E-76
5. Close the roll paper holder, slide the
lock knobs on the left and right sides as
shown in the illustration to align at the
“LOCK” position to lock the roll paper
holder in position, and then tear off the
protruding roll paper.
• Please note that the positions of the
lock knobs on the left and right sides
are different.
6. Slide the lock knobs ( ) on the left and
right sides of the Splash Protect Cover
as shown in the illustration and open the
cover ( ).
7. Attach the Splash Protect Cover as
shown in the illustration.
• Check that the transparent film of the
inner cover is at the position shown in
the illustration ( ).
• Furthermore, the transparent film may
shift from the position shown in the
illustration when the roll paper is torn
off. Check the position of the
transparent film after roll paper has been
torn off.
• Check that the tabs on the inside of the
Splash Protect Cover (located on the left
and right sides) have entered the
indentations on the left and right sides of
the Handheld Printer Terminal ( ).
8. Close the Splash Protect Cover ( ),
and fasten with the lock knobs ( ) on
the left and right sides.
LOCK FREE
2
1
2
LOCK FREE
1
2
1
2
1
2
Transparent film
Tab
Indentation
Splash Protect
Cover bottom plate
1
1
2
2
2
1
2
1
Attaching the Splash Protect Cover
IT-3000_E_P54_77.p65 07.10.3, 5:40 PM 76