G-Shock GW-1800DJ-1A9 - Manual (Page 24)

E-23
To perform manual receive
1. Place the watch on a flat surface so its top (12 o’clock)
is pointed toward an outside window (page E-16).
2. In the Timekeeping Mode, hold down D for about two
seconds until the watch beeps.
3. Release D when the watch beeps. The upper left
display will shows RC! to indicate that signal reception
is in progress.
• To interrupt a reception and return to the Timekeeping Mode, press D.
About the manual receive result indicator
• When signal reception is successful, GET appears in the upper left display and the
watch adjusts its time setting accordingly. After that, the last signal screen will
appear in the upper left display (page E-14).
• After signal reception is successful, the Level 3 indicator (page E-22) will be
displayed in the bottom display in all modes. The Level 3 indicator will remain
displayed until the first signal receive operation of the following day.