G-Shock GW-1800DJ-1A9 - Manual (Page 25)

E-24
• ERR will appear momentarily in the upper left display if the signal receive operation
fails. The watch will not adjust its time setting in this case. After that, the upper left
display will change to the last signal screen, which shows the time and date of the
last successful signal receive operation (page E-14).
• To return to the Timekeeping Mode while the last signal screen is displayed in the
upper left display, press D. The watch will return to the Timekeeping Mode
automatically if you do not press any button for two or three minutes.
• Signal reception is disabled while a countdown timer operation is in progress.
To toggle auto receive on or off
1. In the Timekeeping Mode, press D to display the last
signal screen in the upper left display (page E-14).
• The upper left display will return to normal timekeeping
if you press D or if you do not perform any button
operation for two or three minutes.
2. Hold down A until the current auto receive setting (
for on or for off) flashes in the upper right display.
This is the setting mode.
On/Off status