G-Shock GW-1800DJ-1A9 - Manual (Page 73)

E-72
Resin Components
• Allowing the watch to remain in contact with other items or storing it together with
other items for long periods while it is wet can cause the color of the other items to
transfer to the resin components of the watch. Be sure to dry off the watch
thoroughly before storing it and make sure it is not in contact with other items.
• Leaving the watch where it is exposed to direct sunlight (ultraviolet rays) for long
periods or failure to clean dirt from the watch for long periods can cause it to
become discolored.
• Friction caused by certain conditions (frequent external force, sustained rubbing,
impact, etc.) can cause discoloration of painted components.
• If there are printed figures on the band, strong rubbing of the printed area can cause
discoloration.
• Failure to clean dirt from the watch for long periods can cause fluorescent color to
fade. Wash dirt off with water as soon as possible and then dry the watch.
• Semi-transparent resin parts can become discolored due to sweat and dirt, and if
exposed to high temperatures for long periods.
• Contact an authorized CASIO Service Center to have resin components replaced.
Note that you will be charged for replacement costs.