G-Shock GA110SN - Manual (Page 11)

Operation Guide 5145
109
If the battery level hand is not at its proper home position
Use C to adjust the hand position.
Each press of  x C moves the battery indicator hand clockwise.
Move the hand to its 12 o’clock position.
Holding  x C will cause the hand to move at high speed. To stop high-
speed hand movement, press any button. High speed hand movement
also will stop automatically if the battery level hand completes one
revolution.
108
2.
Adjust hands to their home positions.
If the hour and minute hands are not at their proper
home positions
Use D (+) and B (–) to adjust the hour and minute hand positions.
Holding down either button will cause the hand to move at high speed.  x
Once started, high-speed hand movement will continue even if you
release the button. To stop high-speed hand movement, press any
button.
High-speed hand movement started with the  x D (+) button will stop
automatically after 12 revolutions of the minute hand. If started with the
B (–) button, it will stop after one revolution of the minute hand.
107
Though  x “ADJ” will appear on the display about two seconds after you hold
down A, do not release the button yet. Keep it depressed until “H-SET”
appears.
The watch will return to regular timekeeping automatically if you do not perform  x
any operation for about two or three minutes. Any changes you have made to
settings up to that point will be saved.
If the hour, minute and battery level hands are all at 12 o’clock, which is their
home position, jump to step 3.
106
Hand Home Position Adjustment
Strong magnetism or impact can cause the hands of the watch to be off, even if the
watch is able to perform the signal receive operation. If this happens, perform the
following home position correction procedure.
Home position adjustment is not necessary when the analog hands and digital  x
display indicate the same time in the Timekeeping Mode.
1.
In the Timekeeping Mode, hold down A and
keep it depressed for about fi ve seconds until
“H.SET” appears on the display.
The hour, minute and battery level hands should all  x
move to 12 o’clock, which is their home position.
Also, “0:00” will appear on the display.
+RXUKDQG
%DWWHU\OHYHOKDQG
0LQXWHKDQG
$ERXW
VHFRQGV
105
7.
When the setting is the way you want, press A to exit the setting screen.
Digital-Analog Synchronization
The watch automatically adjusts its analog setting to match the current digital time
setting.
Depending on how many hours different the digital and analog time settings are, it  x
may take some time for the analog hand setting procedure to be fi nished.
104
e. When the Power Saving setting is selected
Press D to toggle Power Saving between on and off.
Repeat the above steps as many times as necessary to select each setting
and change it as required.
When setting the hour, make sure you specify AM (no indicator) or PM (P) correctly  x
when using 12-hour timekeeping, or that you specify the correct 24-hour time.
You can set the year within the range of 2000 to 2099. The day of the week is set  x
automatically in accordance with the date you set.
The watch makes adjustments for leap years and month lengths automatically.  x
103
+RXU
0LQXWHV

Ŏ c. While the hour, minutes, year, month, or day setting is
fl ashing, press D or B to change it.
Holding down either button scrolls through the settings at  x
high speed.
d. When the operation tone setting is selected
Each press of D toggles the operation tone between on
and off.
2SHUDWLRQWRQHRQ
2SHUDWLRQWRQHRII
102
6.
Use D (+) and B (–) to scroll through the available options at the current
fl ashing setting.
KRXUWLPHNHHSLQJ
a. When the 12/24-hour timekeeping setting is selected
Pressing
D toggles the timekeeping format between
12-hour (“12H” indicator) and 24-hour (“24H” indicator).
b. When the seconds setting is selected
Press
D to reset the seconds to 00 in accordance with the
time signal on the radio, TV, etc.
Pressing  x D while the seconds count is in the range of 30
to 59 resets it to 00 and adds 1 to the minutes. Pressing
D in the range of 00 to 29 resets the seconds count
without changing the minutes.
5HVHWVWR
101
Home City
C
Summer Time
C
12/24-hour
timekeeping
C C
Power Saving Second
C C
Operation tone Hour
C C
Day
C
Month
C
Year
C
Minute
100
5.
Use C to move the fl ashing to the setting you want
to change.