Verykool i310 - Manual (Page 12)

8
GETTING STARTED
First Call
 Insert a SIM card (Switch off your phone at first, and then remove the battery).
Enter the area code and the phone number and press Pick Up Key.
Tip: Before you get started, you must insert a valid SIM card in your phone and
charge the battery first.
 SIM Card: Please refer to “Mounting the SIM Card” for more reference on
installation.
 Charging the battery: please refer to “Charging the battery” for more details.
Mounting the SIM Card
Your mobile phone number, PIN (Personal Identification Number), PIN2, PUK
(Personal Unlock Key), PUK2 (Personal Unlock Key2), IMSI (International Mobile
Subscriber Identity), the network information, the phonebook data, SMS (short
messages) and other data are stored in your SIM card.
Note: This particular phone model only supports the SIM cards of 1.8V and 3V.
 Some network operators don’t offer PIN2 and PUK2, so functions using those
passwords will be unavailable.
 The SIM card and its contacts can be damaged by scratches or bending easily, so
be careful while handling, inserting or removing the card.
 Keep all miniature SIM cards out of children’s reach.
Note: Always make sure the phone is switched off before you insert or remove the
SIM card, otherwise it may damage the SIM card.
Mounting
Remove the battery cover by sliding it. Open the gold cap from the Hinge Type
Connector. Lay the SIM card which gold contacts face down on the Connector, then
close it. Align the card to the arrow sign as the following picture shows:
Note:
 If the SIM Card is installed improperly or damaged, the prompt words “Insert SIM”
will display on the screen after you switch on your phone. Remove the SIM Card
and check the way that performs as pictures show, and then mount it again.
 If “Insert SIM” still appears on the screen after you have inserted the SIM correctly,
there may be something wrong with your SIM card. Please ask the network
operator to repair it.
 If the screen displays that the SIM card is locked permanently, please consult with
your network operator.