Verykool i310 - Manual (Page 20)

16
Bluetooth
You will enter into Bluetooth mode after you activate the Bluetooth function. This
mode has no Activate option; the detailed operation has been shown in the
“General”.
Power Saving
This mode is only activated. The backlight goes dim when you activate this profile.
You can’t open Multimedia, Fun & Games, Bluetooth, File Manager etc in this
profile.
Phone settings
Time and Date:
 Set Time Zone: Select the desired home city.
 Set Time/Date: Enter the current time, date and Daylight saving.
 Set Format: Select a time, a date format and Date separator.
 Update with Time Zone: It can be set to On or Off.
Schedule Power On/Off: You can set the time for auto power on /off. Do turn the
status on before using that function.
Note: Please disable the Schedule Power On function before you board an airplane.
Language: Select the desired language for the display text.
Pref. input Methods: Select the desired input method for the default input method.
Greeting Text: Set the status on, greetings will display when power on.
Shortcuts: You can set shortcuts for those functions you often use.
Dedicated Key: You can configure short cut functions for the Up, Down, Left and
Right key respectively. In the standby mode, press any one of them to access the
appointed function.
Auto update of date and time: It can be set to On or Off.
UART settings: When using this phone as GPRS Modem, select different UART
port to decide whether SIM1 or SIM2 to be used.
Display
With this function you can configure the basic status of display characteristics
including Wallpaper, Screen saver, Power on display, Power off display, Show
date and time, Show owner number, Keypad light set and LCD backlight.
Network Settings
Please contact the network operator for the following network service.
1. Network Selection
New Search or Select Network can help search the network where you are in. You
can select the selection mode: Automatic or Manual. When you select Automatic, the
phone will make the preferential selection according to the network where the SIM
card belongs. When you select Manual, you are required to select the same network
as the registered network with the network operator by SIM card for your use.
2. Preferences
Select the Preferred Networks. The default network is the network where the SIM
card belongs. Select Options to perform the following operations:
 Add From List: Display all PLMN list.
 New: Create a new network and set the network priority.
 Change Priority: Reset the selected Network Priority.
 Delete: Delete the current preferred network.