Verykool i310 - Manual (Page 18)

14
−
Cancel all diverts: Use to cancel all diverting functions.
 Call barring: This function makes use of Call Barring to limit some
selected calls. When you configure this function, you should consult your
network operator for the password. If the password is wrong, the phone will
prompt the fault message. After the desired number is selected, please
continue to select On or Off. After a while, the network will take a response
and tell you the result.
−
Outgoing calls:
1. All calls: When this option is enabled, you can’t make any calls.
2. International calls: When this option is enabled, you can’t make any
international calls.
3. International calls except to home PLMN: When this option is enabled,
you can only make local calls when you are abroad or dial to the country in
which the network provider is.
−
Incoming Calls:
1. All calls: When this option is enabled, you can’t make any calls.
2. When Roaming: When this option is enabled, you can’t receive any
incoming calls if you are out of reach of the network service.
−
Activate all: When this option is enabled, you cannot receive any
incoming calls.
−
Cancel all: Cancel the call barring. It also needs the Call baring password
provided by the network operator.
−
Change Barring Password: Use to modify the Call baring password. It
needs to input the original password before you modify.
 SIM1/ SIM2 Line Switching: Switch to Line 1 or Line 2, the default is Line
1.
Note: If Line 2 is selected, making calls from Line 2 depends on the
network operator.
 SIM1 Closed User Group: Press the left soft key to access Group List,
and then select Add to input the group's name. Press the left soft key to
select Done, and then add the number. Press the left key to finish. Select
Option to Edit, Add, Activate, Deactivate or Delete the existent group.
Advance settings:
1> BlackList: you can set 20 blacklist numbers. When this Black list is
enabled, you won’t receive the calls from the numbers entered in the
Blacklist.
2> Auto Redial: Set the status on, the phone will automatically redial the last
called number after a while if you fail to connect to the number. The times
for auto redial are up to 10 times. Press Cancel to end Auto Redial.
3> Call Time Display: You can set Call Time Display On or Off. The call time
will display when set it on. The call time won't display when set it off.
4> Call Time Reminder: In order to save the call cost, this function prompts
you to end the call in time. You can select Off, Single, or Periodic. There is
no prompt when Off is selected. You should enter a specific time between 1
and 3000 seconds when Single is selected. The phone will ring once when
the time is up. You should enter a specific time between 30 and 60 seconds
when Periodic is selected. The phone will ring once automatically at the
specific time before the integral minute is up.