Keri Systems RPB-200 - Manual (Page 3)

RPB–200: RF Receiver
1530 Old Oakland Road, Suite 100 01825-200 Rev. B
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 3 of 8
RPB–200
Quick Start Guide
2.3 Connecting to the Design 5 PXL-100
For the RPB-200 to work with a PXL-100, the PXL-100 must have an OB-7 Wiegand Interface option board installed.
The cable connects to J1 on the OB-7, pins 1 and 2; and J2 on the OB-7, pins 1, 2, 5, and 6.
2.3.1 Connecting to the PXL–100 @ OB–7, J1
Figure 4: PXL–100/J1 Connections on the OB–7
Pin #
OB–7 PCB
Marking
Function Wire Color
1 0V Ground Black
1 0V Shield Silver
2 12V 12V Power Red
3 – – –
4 – – –
5 – – –
6 – – –