Keri Systems KRE-2 - Manual (Page 3)

KRE-2: Metal Enclosure
2305 Bering Drive 01854-001 Rev. E
San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: www.kerisys.com E-mail: [email protected]
Page 3 of 4
KRE-2
Quick S
tart Guide
3.0 Cabling Knockouts
Twelve knockouts are provided for maximum flexibility in routing cables.
Four are on the back of the enclosure. There are two on the top, two on the bottom, two on the left
side, and two on the right side of the enclosure.
NOTE: Figure 3 provides the measurements for the knockout locations. Figure 3 is not an actual
size drawing and cannot be used as a drilling or routing template.
Figure 3: Enclosure Knockouts