KERN & SOHN TEB 200-1 - Manual (Page 10)

TEB-BA-e-0510 10
7.1.5 Unit change
Switch the balance on by pressing the key, then wait for the “0” indication.
The units set in the balance can be selected between the different units, by pressing
the key
Display
Conversion factor
1 g =
Gramm * g 1.
Tael Taiwan tlt 0.02667
Tola tol 0.08573
* Factory setting
8 Maintenance, upkeep, disposal
8.1 Cleaning
Please disconnect the device from the operating voltage before cleaning.
Only use a cloth dampened with mild suds and not aggressive cleaning agents (sol-
vents or similar). Please ensure that fluids are not able to get into the device and rub
off using a clean, soft cloth.
Loose sample residue/powder can be removed carefully using a brush or hand vac-
uum cleaner.
Remove any spilt material to be weighed immediately.
8.2 Maintenance, upkeep
The device may only be opened by trained service engineers authorised by KERN.
8.3 Disposal
The operating company shall dispose of the packaging and the device in compliance
with the valid national or regional law of the operating location.