KERN & SOHN IEX 100K-1MEU Safety User Manual
Page 10
10
IEX-BA-e-1410
zero indication
stable result
kg
weight unit
6
Changing the scale place of operation
While moving a scale in another place of operation, all safety
measures listed in point 5 of this instruction should be taken.
7
Cleaning and maintenance
Unplug the power adapter IEX-A01 from mains.
Check wether the indicator´s electrostatic grounding is correctly plugged and is
not defected.
Clean the scale and the housing with a slightly moistened cloth. You
can use typical domestic cleaning agents.
For clearing an overlay of the indicator do not use agents that can
mechanically scratch the surface. It includes an internal conductive
layer that is important for save operation.
Platform levelling feet and shock absorbers are made of rubber.
Within the hazardous area they need to be cleaned with a slightly
moistened cloth. Moisture protects against gathering electrostatic
charges.
While cleaning the platform do not damage the masking springs.
They are for gathering electrostatic charges from the weight pan.
They should be ~5mm above the shock absorbers.
Cleaning may not be performed when there are explosive gases.
There is forbidden to use concentrated acids, bases, solvents or
alcohol for cleaning the device.
There is also forbidden to use compressed air and high pressure
washing equipment.