KERN & SOHN IEX 100K-1MEU Safety - Manual (Page 9)

IEX-BA-e-1410 9

Put the weighing pan onto the weighing platform,

Place the power adapter outside the explosive zone (i.e. in a safe area),

Plug the cable (~20 m) to the power outlet DC IN on scale’s indicator
KEX-TM.
1. Power socket
2. Power adaptor connector
3. Grounding lamp
4. Load cell conductor
5. Data plate of power connector

Before the first start up, make sure, there is no explosion danger
–
there is no explosive atmosphere. If there is any sign that the
scale is not working properly, unplug it from mains, secure it and
notify KERN service.

Connect the supplier to mains 230V AC.

In case of prolonged not using of the scale
– unplug it from mains.

Press ON/OFF to switch on the device – keep pressing it for about 1 sec.

Wait for the test completion, then you will see zero indication and pictograms: