KERN & SOHN FKTF - Manual (Page 17)

After the first measurement object
has been placed it will be confirmed
with TAKE GROS. The balance
jumps automatically to the second
target.
At any time you can stop
the measurement with QUIT MEAS.
OK = measured value is within the
tolerance (between TU and TO)
+ = passed the upper limit (TO)
- = below the lower limit (TU)
After the last measurement object
the scale displays "Ready" and the
series of measurements can be
printed with PRNT END.
By pressing, the scale also jumps
back to the start screen.
The measured values are stored for
the daily and weekly statistics, if
they are activated under MENU /
Configuration / Setting control mode
/ Statistic.
FKTF-BA-e-1511 17