KERN & SOHN FKTF - Manual (Page 23)

7.1.1 Explanation of the data transfer
Each data transfer is structured as follows:
Bit.Nr. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
N N N N N B B B B B B B B B B B 0 • 0 0
Bit.Nr. 21 22 23 24 25 26
E E E E CR LF
N = Numerator
B*: = Blank or for autotare on in zero range.
B, 0,
.
, g: = Blank or weighing value giving unit according to loading of the balance
E = Unit
CR: = Carriage Return
LF: = Line Feed
8 Service, maintenance, disposal
8.1 Cleaning
Before cleaning, please disconnect the appliance from the operating voltage.
Please do not use aggressive cleaning agents (solvents or similar agents), but a cloth
dampened with mild soap suds. Ensure that no liquid penetrates into the device and wipe
with a dry soft cloth. Loose residue sample/powder can be removed carefully with a brush
or manual vacuum cleaner.
Spilled weighing goods must be removed immediately.
8.2 Service, maintenance
The appliance may only be opened by trained service technicians who are authorized by
KERN. Before opening, disconnect from power supply.
8.3 Disposal
Disposal of packaging and appliance must be carried out by operator according to valid na-
tional or regional law of the location where the appliance is used.
FKTF-BA-e-1511 23