KERN & SOHN CFS 50K-3 - Manual (Page 57)

(1) Adjusting the bulk scales, all models except for CFS 50K-3
1. Internal resolution
 Press , the internal resolution will be shown.
Return to menu by .
Use to select the next menu item „Cap“ .
„Cnt“
2. Position decimal point / capacity „CAP“
 Press on display „CAP“; the currently adjusted position
of the decimal point will be displayed.
Select desired setting with and acknowledge by .
The currently set capacity is displayed.
Delete with for changes, and input desired value with
the numeric keys.
Confirm input with , the balance returns to the menu.
 Select the next menu point „div“ with .

„dESC“ „0.00“

„SEL“ „000030“

„CAP“
3. Readability „div“
 Press , the current setting will be displayed.
Select desired setting by and confirm with , the
balance returns to the menu.
 Select the next menu point „AZt“ with

„inC“ „1“

„div“
4. Automatic zero tracking
on display change
„AZt“
 Press , the current setting will be displayed.
Select desired setting by and confirm with , the
balance returns to the menu.
 Select the next menu point „0 AUto“ with
.

„AZn“ „2d“

„AZt“
CFS/CCS-BA-e-1422 57