KERN & SOHN CFS 50K-3 - Manual (Page 43)

10.2 Automatic adding-up
This function is used to add up the individual weighing values automatically into the
sum storage once the scale is relieved, without pressing or (models CFS
50K-3); and edited if interconnected to an optional printer.
• Menu settings:
„F1 off“  „ACC“  „ON“ (unavailable in model CFS 50K-3)
„F2 Prt“
 „P mode“  „Print“  „Au ON“, cf. chapter 12.2
• When using as counting system there can be totalized on the reference as
well as on the bulk material balance.
Before the totalizing process select the active balance, see chap. 7.3.
Add up:
 Place weighing goods A.
After the standstill control sounds a signal tone. Unload the weighing good, the
weighing value is added into the summation memory and printed out.
 Place goods to be weighed B.
After the standstill control sounds a signal tone. Unload the weighing good, the
weighing value is added into the summation memory and printed out.
 Add more weighed goods as described before. Please note that the balance
must be unloaded between the individual weighing procedures.
 This process can be repeated 99 times or until the weighing range of the balance
is exhausted.
Display and deletion of the weighing data, and printout example
cf. chapter 10.1.
CFS/CCS-BA-e-1422 43