KERN & SOHN CFS 50K-3 - Manual (Page 44)

11 Store article information
The scale has more than 100 article storage places for frequently used tare values,
average piece weights and article names.
These data can be accessed by calling up the corresponding number of a certain
article.
Model CFS 50K-3 is additionally provided with 5 direct keys ~ , cf. chapter
11.3).
11.1 Store article
Preparation:
 If necessary set balance to zero using .
 Tare if using a weighing container.
In case of counting systems, consider whether bulk scales or counting scale
should be tared. Select bulk material or reference balance accordingly by .
The displayed [
] shows the active type of scale, cf. chapter 7.3.
Either put on weighing container and tare with TARE key (cf. chapter 7.4.1.) or
numerically input tare value (cf. chapter 7.4.2).
Tare values can only be saved when they are situated in the admitted taring
range (factory setting > 2 % max).
At values < 2 % max, reset balance with .
 If used as a counting system select reference balance using
.
 Either detect average piece weight (e.g. 10 g) by weighing (cf. chapter 8.1) or
input numerically (cf. chapter 8.2).
44 CFS/CCS-BA-e-1422