KERN & SOHN KFS-TM - Manual (Page 23)

7.6.1 Determination of the average piece weight by weighing
Set reference
 Reset balance to zero or tare the empty weighing container if necessary.
 Place on the weighing plate a known number (e.g. 10 items) of individual pieces
as a reference.
 Wait for the stability display, than enter the number of individual items via the
numeric keypad.
 Acknowledge with .

The balance determines the average piece weight.
Count the items
 Tare if necessary, place weighing good and read off the number of items.
Delete reference
 Press
, the average unit weight will be deleted.
KFS-TM-BA_IA-e-1410 23