KERN & SOHN ILJ 25K-4CM - Manual (Page 60)

60 ILJ-C/ILS-C-BA-e-1320
P2.5.5.1 will be displayed showing the
previous setting for the F1-key.
(example)
3x
Press F1 to select F4.
(example)
The settings to be selected will be
flashing. Use the arrow keys to select
ENTER REFERENCE WEIGHT.
Confirm with PRINT.
This completes the allocation of the
ENTER REFERENCE WEIGHT function
used for dosing to the F4-key.
In dosing mode this allows you to enter the target weight along with the
corresponding tolerance by pressing F4.
Enter target weight
Setting weighing mode in operating mode dosing:
Operating mode dosing has now
been set.
The symbol for dosing will be
displayed at the upper margin of the
display.
The setting REFERENCE WEIGHT
0.0 will be displayed at the lower
margin.
Entering target weight:
The display used to enter the target
weight appears with the left digit
flashing.