KERN & SOHN HFT 15T5 - Manual (Page 22)

22 HFT-BA-e-1310
5.3 Turn on/off
Start-up
 Press on the display unit; the unit will carry out a self-test. As soon as the
weight display appears, the instrument will be ready to weigh.
 At the crane scales put the ON/OFF switch to „ON“

If „Err 10“ appears in the weight display no radio
communication with the balance could be established.
Either the crane scale is not yet switched on or the
rechargeable battery has not been sufficiently loaded.

Switch on the crane scale with the ON/OFF switch or reload
the battery.

„Err 10“ disappears and the zero display will appear. The
balance is now in weighing mode and ready for operation.
Switching Off
Press at the display unit, the display disappears.
At the crane scales put the ON/OFF switch to „OFF“
5.4 Set balance to zero
In order to obtain optimal weighing results, reset to zero the balance before weighing.
Manual

Unload the balance

Press , zero display as well as indicator ZERO will appear.
Automatic
In the menu the amount of the automatic zero point correction can be changed,
see chapter 6 / Function „F1 A20“.