KERN & SOHN HFT 15T5 - Manual (Page 37)

HFT-BA-e-1310 37
9 Error messages
Error
message
Description Possible causes
--ol- Maximum load exceeded

Reduce load

Check whether the balance has
been damaged
Err 4
Zeroing range exceeded due
to switching-on balance or
pressing (normally 4%
max)

Load attached

Overload during setting to zero
Err 5 Keyboard error

Improper operation of the balance
Err 6
Value outside the A/D changer
range

Damaged weighing cell

Damaged electronics
Err 10 No signal

Distance emitter / receiver too
long

Emitter (connecting box) not
switched on
Lo bA
Capacity of rechargeable
battery exhausted

Recharge battery
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.