KERN & SOHN HFT 15T5 - Manual (Page 3)

HFT-BA-e-1310 3
5.1 Safety instructions
_________________________________________________________________ 18
5.2 Loading the crane scales
___________________________________________________________ 19
5.3 Turn on/off
_______________________________________________________________________ 22
5.4 Set balance to zero
________________________________________________________________ 22
5.5 Taring
___________________________________________________________________________ 23
5.6 Weighing
_________________________________________________________________________ 23
5.7 Fix the weight value (Data-HOLD function)
____________________________________________ 24
5.8 Weighing Units
____________________________________________________________________ 24
5.9 Totalization
_______________________________________________________________________ 26
5.10 Automatische Nullpunktkorrektur
____________________________________________________ 29
6 Menu
________________________________________________________ 30
6.1 Navigation in the menu:
____________________________________________________________ 30
6.2 Menu overview
____________________________________________________________________ 31
7 Adjustment
___________________________________________________ 33
8 Data output RS 232
____________________________________________ 35
8.1 Technical data
____________________________________________________________________ 35
8.2 Technical data
____________________________________________________________________ 35
8.3 Continuous data output
____________________________________________________________ 35
8.4 Printer mode
______________________________________________________________________ 36
9 Error messages
_______________________________________________ 37
10 Cleaning, Maintenance and Disposal
______________________________ 38
10.1 Cleaning and Disposal
_____________________________________________________________ 38
10.2 Regular maintenance and care
______________________________________________________ 39
10.3 Regular maintenance
______________________________________________________________ 39
10.4 Checklist „regular maintenance“, (see chapter 10.3)
____________________________________ 40
11 Enclosure
____________________________________________________ 43
11.1 Checklist „Enhanced maintenance“ (General revision)
__________________________________ 43
11.2 List „spare parts and repair of safety-relevant parts“
____________________________________ 44