KERN & SOHN MBC 20K10M - Manual (Page 36)

36 MBC-M-BA-e-1312
 Ensure that there are no objects on the weighing pan.
 Wait for stability display "STABLE", then confirm with
(example)
 The size of the currently set adjustment weight is displayed,
the active site flashes.
If required, select with he digit to be altered and change
the digit with .
Confirm with , [LoAd] appears

 Put the required adjustment weight carefully in the centre of
the weighing pan.
 Wait until stability display „STABLE“ appears
 Confirm with [PASS] is displayed.
After the adjustment the balance will carry out a self-test. Remove
adjusting weight during selftest, balance will return into weighing
mode automatically.
An adjusting error or incorrect adjusting weight will be indicated
by the error message; repeat adjustment procedure.
An adjusting error or incorrect adjustment weight will generate an
error message („Err 4“), repeat the adjustment process.