KERN & SOHN MPB 300K100P - Manual (Page 20)

MPB / MXS -BA-e-1113 20
7 Using the balance
7.1 Weighing
 Turn on balance by pressing the [ON/OFF] key. The balance carry out a seg-
ment test, then the program version is displayed. Your balance is ready to
weigh as soon as the “0.0 kg" display appears.
Information: The [
0 ] key can be used to set the balance to zero at any
time.
 Place person in the centre of the balance or place baby in the scale pan. Wait
until the standstill display (
ο) appears, then read the weighing result.
Note:
If the person is heavier than the weighing range, "Err" (=overload) will appear in the
display.
7.2 Taring
The tare weight of any preloads can be deducted by pressing a button so that the
actual weight of the person is displayed in subsequent weighings.
 The balance will display 0 if, for example, a rubber mat has been placed
on the weighing plate.
 To start the taring process press the [TARE] key. The weight will now be
saved internally and 0.0 kg will be displayed.
 Place the person in the middle of the weighing plate.
 Now read the weight from the display.
Information:
The balance is able to only store one taring value at a time.
When the balance is unloaded the saved taring value is displayed with negative sign.
Remove all items from the weighing plate in order to delete the stored tare value and
subsequently press the [TARE] key.