KERN & SOHN MFB 150K100 - Manual (Page 6)

-
Place the balance on a firm, level surface;
-
Avoid extreme heat as well as temperature fluctuation caused by installing
next to a radiator or in the direct sunlight;
-
Protect the balance against direct draughts due to open windows and doors;
-
Avoid jarring during weighing;
-
Protect the balance against high humidity, vapours and dust;
-
Do not expose the device to extreme dampness for longer periods of time.
Non-permitted condensation (condensation of air humidity on the appliance)
may occur if a cold appliance is taken to a considerably warmer environment.
In this case, acclimatize the appliance for ca. 2 hours at room temperature.
-
Avoid static charge of the balance and of the person to be weighed.
-
Avoid contact with water.
If electro-magnetic fields or static charge occur, or if the power supply is unstable
major deviations on the display (incorrect weighing results) are possible. In that case,
the location must be changed.
5.2 Unpacking
Take the whole balance out of their packaging and place them at the intended
position.
In addition to the balance, delivery includes the operating instructions and a battery.
5.3 Battery operation (insertion and removal)
To insert your battery, open the battery compartment at the rear of the balance and
insert 4 alkaline batteries of AAA size in the correct direction of the pole, then close
the battery compartment.
If the balance is not used for a longer time, take out the batteries and store them
separately. Leaking battery liquid could damage the balance.
MFB -BA-e-0810 6