KERN & SOHN MFB 150K100 - Manual (Page 9)

d. When age starts to flash, this too, can be changed by pressing the arrow keys.
Complete your data entries by pressing SET.
After these entries have been made, the display will show “
_ _ _ _“ for a short while.
Afterwards 0.0 kg will be displayed and the balance are ready for weighing.
When the balance are not in use they automatically switch off after a short time.
7.2 Usage as body fat balance
After having carried out the previous settings the balance will be ready for operation.
After start-up the data for the last person enabled will be shown one after the other
(gender, height and age).
If the stored data is incorrect, you will have to enter the data again or make changes.
The balance are ready for operation when 0.0 kg appears on the display. For this
purpose, the person must step barefoot on the round elements of the weighing plate
and stand as still as possible.
a. The weight will be shown automatically.
b. After the weighing value has come to a stop, the symbol “o“ will drift across the
display indicating that weighing is taking place.
c. After successful completion of the weighing process, the body fat ratio will be
shown in percent. ( fat )
MFB -BA-e-0810 9