KERN & SOHN MFB 150K100 - Manual (Page 8)

TBW
MUS
BONE
Display: Body water ratio in %
Display: Muscle ratio in %
Display: Bone weight in kg
You can change the scale’s weighing unit from “kg“ to “lb“ at the rear of the balance.
When changing the weighing unit to lb you must enter the body height in ft.
7 Using the balance
To switch on balance, press one of the 3 keys.
Display unit “PX“ (X may be selected from 0 to 9) starts to flash. To select a different
digit, press the arrow key up or arrow down.
Prior to initial use enter gender, age and height for each person. These entries will be
stored under the respective, previously selected number.
Set this individual number for each person before the weighing process by pressing
the arrow keys.
7.1 Entering person-related data
a. With the balance switched on, select the respective number by pressing the arrow
keys as described above and confirm by pressing the SET key. The display
described below appears:
b. When the symbol used to select the gender starts to flash you can change
between "male“ and “female“ by pressing the arrow keys. Confirm by pressing SET.
c. When body height ( cm ) starts to flash, you can change this value, too, by
pressing the arrow keys. Again, confirm by pressing SET.
MFB -BA-e-0810 8