KERN & SOHN MCB 300K100M - Manual (Page 37)

12.5 PRE-TARE function
If the tare weight is known (rubber mat, clothing…..) . you may inter the value
manually.
0
0.0
Start balance by pressing
OFF
ON
Wait for the rest position display .
000.0
 Press
PRE-
TARE
briefly.
A flashing display appears.
A small arrow will be shown on the display under “PRE-TARE”
and under “NET” as long as the PRE-Tare function is enabled.
The most recently applied value or “000.0“ will appear.
 Go to the numeric keypad and enter a new value.
 Confirm value with
ENTER
-1.0
The entered value appears on the display with a minus in front.
67.0
 Have the person sit or stand on the scales
The weight value reduced by the previously entered tare
value will be shown.
68.0
 To return to normal weighing mode, again press the
PRE-
TARE
button.
MCB_MPT-BA-e-1418 37