KERN & SOHN FC 10 - Manual (Page 12)

12 FC-BA-e-1410
3.4.6 Calibration
For details, see chapter 5.3.
3.4.7 Default
With this function, the force gauge can be restored back to the factory settings. This
function should be performed under the guidance of professionals usually.
3.5 Language
The force gauge can display in multi-language, set the language desired.
See Fig 3-14:
3.6 Info
Here you can find out some information about the force gauge, such as model, ver-
sion and serial number.
See Fig. 3-15:
Fig. 3-15
4 Communication Port
The force gauge has two kinds of ports for recharging and communicating with PC
and other equipment.
4.1 USB/Recharge
Using this port, you can connect the gauge to the computer for transform data to PC
in accordance with USB2.0.