Kuzma Stabi S 12inch 90629 - Manual (Page 3)

3
General Description: the turntable is packed in one box on which is indicated whether an
armboard for a different tonearm is included.
The basic approach to the turntable design was the same as that of all our products. Its unique
shape and construction from solid brass rods provide an extreme rigid connection of platter,
bearing and tonearm support. The motor is housed independently in its own tower which
dampens motor vibration. The bearing is of highly polished, fine grain carbon steel with a
one point contact, while the bearing sleeve is of a resin/textile material which has excellent
damping, non-resonant and high sliding properties. With the mat on top and rubber insert
underneath, the platter provides a stable non - resonant platform for records, which can also
be clamped.
A 45 rpm adaptor is provided and is simply slipped over the 33 rpm motor pulley. The
turntable can accommodate various tonearms by the use of different brass bases and allows
for VTA adjustment on any tonearm mounted. It is possible to add a second tonearm if a
special adaptor (available as an optional extra) is added.
Stabi S12 turntable: Technical data
Mass: 15 kg
Platter: 4 kg
Motor: AC synchronous
Speeds: 33, 45 rpm
Tonearm mounting dist.: 295 mm
Dimension: 500x 300x 140 mm
Power and frequency: see motor base
Optional: clamp, wooden platforms, various armboards, adaptor for second tonearm.
Safety Precautions:
Electrical connection to the mains comes from the motor assembly via the cable. Please keep
the motor assembly away from moisture and be careful not to damage the mains cable. If in
doubt consult your dealer.